| TVOUT |
1 |
CVBS output, NTSC mode and PAL mode |
| HDMI |
1 |
Video:
- 2D Video up to 4K@60fps;
- 3D Video up to 4K@30fps;
Audio:
-IEC60985 L-PCM unpressed audio form, up to 192 kHz;
-IEC61937 pressed audio form, up to 1536 kHz |
| LCD/LVDS |
1 |
LCD and LVDS are multiplexed;
LCD:
- RGB(DE/SYNC) up to 1920x1080@60fps;
- Serial RGB/dummy RGB up to 800x480@fps;
- i8080 up to 800x480@60fps;
- BT656 up to 1280x720@60fps or 1920x1080@30fps;
- RGB888, RGB565, RGB666;
- can support R/G/B separate Gamma correcting
LVDS:
- dual-lane up to 1920x1080@60fps;
- single-lane up to 1366x768@60fps |
| MIPI_CSI |
1 |
supports image tailoring;
supports MIPI Version 1.0;
up to 1.0Gbps/Lane;
video capturing rate up to 8M@30fps or 4*1080p@25fps; |
| CSI_DVP |
1 |
can support 8/10/12/16 bit DC;
supports BT656, BT601, BT1120;
supports ITU-R BT.656 TDM, up to 4*720p@30fps id DDR sampling mode;
supports progress and interlace video input;
video capturing rate up to 5M@15fps and 1080p@30fps;
pixel clock up to 148.5MHz |
| USB2.0 |
4 |
OTG:
- can support 1* OTG;
- High-Speed (HS, 482), Full-Speed(FS, 12Mbit/s) and Low-Speed (LS, 1.5Mbit/s) in master mode;
- High-Speed (HS, 482 Mbit/s) and Full-Speed (FS, 12Mbit/s) in slave mode
HOST:
- can support 3* host;
- can support High-Speed (HS, 482 Mbit/s),Full-Speed(FS,12Mbit/s) and Low-Speed(LS, 1.5Mbit/s) devices |
| SD |
2 |
SDHC0(SD3.0):
- 4bit BUS width;
- SDR mode 50MHz@3.3V IO pad;
- SDR mode 150MHz@1.8V IO pad;
- DDR mode 50MHz@3.3V IO padSDHC1(SDIO3.0):
- 4bit BUS width;
- SDR mode 50MHz@3.3V IO pad;
- DDR mode 50MHz@3.3V IO pad |
| RMII |
1 |
10/100Mbps auto-negotiation |
| RGMII |
1 |
10/100/1000 Mbps auto-negotiation; RGMII could be multiplexed to RMII for dual fast Ethernet expanding |
| UART |
≤ 6 |
UART0, UART5: 2-wire, UART1, UART2, UART3, UART4: 4-wire;
Comply with 16550 UARTs;
speed up to 4Mbit/s;
can support 5 ~ 8 data bit and 1/1.5/2 stop bit;
can support RS-485/9-bit mode |
| TWI |
≤ 5 |
standard mode(up to 100kbit/s) and fast mode(up to 400kbit/s) |
| SPI |
≤2 |
3-wire/ 4-wire SPI: up to 100MHz |
| SCR |
1 |
ISO/IEC 7816-3:1997(E) and EMV2000(4.0) |
| PWM |
≤ 6 |
3 couples of PWM: PWM01 consists of PWM0 and PWM1, PWM23 consists of PWM2 and PWM3, PWM45 consists of PWM4 and PWM5;
can support pulse(configurable), circle and complementary pair output;
can support capture input;
programmable dead zone output;
built-in programmable dead zone time generator, controllable dead zone time;
three types of output waves: continuous wave; pulse wave, complementary wave;
output reference range: 0 ~ 24MHz/100MHz; duty ratio: 0% ~ 100%;
minimum resolution: 1/65536; supports PWM output and input interrupt |
| JTAG |
≤ 1 |
|
| CIR |
1 |
supports NEC data;
supports remote controller or wireless keyboard CIR;
64x8 bit FIFO for data buffer;
sampling clock up to 1MHz |
| GPADC |
4 |
can support 4 general purpose ADC, 12-bit resolution;
maximum sampling rate 1MHz;
can support data comparison and interrupt;
can support DMA transactions;
signal input range: 0～1.8V;
supports three working modes: single conversion, continuous conversion burst conversion |
| LRADC |
1 |
6-bit resolution
sampling rate up to 2kHz
supports hold Key and general Key
supports normal mode, continuous conduction mode and single work mode;
Power supply voltage: 1.8V
Power reference voltage: 1.35V, analog input
detected voltage range: 0 ~ LEVELB(maximum 1.266V) |
| LINEIN |
1 |
reserved, not available |
| LINEOUT |
1 |
supports dynamic range controller to adjust DAC playing;
2 DAC channels:
- can support 16-bit and 20-bit sampling rates;
- 8kHz ~ 192kHz sampling rate;
- 95±2db SNR@A-weight, -80±3db THD+N, output up to 0.55Vrms1 audio output:
- one differential LINEOUTP/N or single-end LINEOUTL/R |
| DMIC |
1 |
an support up to 8 digital PDM micphones;
can support sampling rate 8kHz to 48kHz |
| OWA |
1 |
1 x OWA sending |
| I2S |
≤4 |
one built-in audio HUB;
supports 2 Digital Audio MIXER(DAM);
supports 3* I2S/PCM peripherals and 1* I2S/PCM for connecting internal HDMI;
supports left-justifying, right-justifying, standard I2S, PCM, tdM;
I2S supports 8 channels, 32-bit/192kbit sampling rate;
I2S and TMD mode up to 16 channels, 32-bit/96kbit sampling rate |
