| Specifications |
| SOM3730 |
DM3730 |
1GHz ARM Cortex™-A8 Core NEON™ SIMD Coprocessor 800MHz TMS320C64x+ DSP POWERVR SG™ 2D/3D graphics accelerator |
| RAM |
256MByte/512MByte LPDDR |
| Flash |
256MByte/512MByte/1GByte NAND Flash |
| Ethernet |
1x 10M/100M High performance Ethernet |
| COM port |
1x RS232(5 Lines: TX,RX,CTS,RTS,GND) |
| 1x3.3V UART(5 Lines: TX,RX,CTS,RTS,GND) |
| USB Host |
4x USB 2.0 high speed Host(each provide 500mA current) |
| 1x built-in USB 2.0 high speed Host |
| USB OTG |
1x USB 2.0 high speed OTG |
| JTAG |
1x 14Pin TI standard JTAG |
| Audio |
1x 3.5mm stereo audio phone jack |
| 1x built-in stereo audio phone jack |
| 1x 3.5mm microphone jack |
| VGA |
Standard VGA Support standard resolutions from VESA standards, up to 1920x1080 |
AV/S-Video output |
Standard S-Video out jack with AV support Support the following standards: ?NTSC-J, M ?PAL-B, D, G, H, I ?PAL-M ?CGMS-A as described in the CEA-608-x Standard. |
| Video input |
4 channel video input Support up to: 4 CVBS Or 1 CVBS + 1 YPbPr/RGB(embedded sync) Or 2 CVBS + 1 S-Video Or 2 S-Video CVBS supports NTSC/PAL/SECAM |
| SD Slot |
MMC/SD/SDIO/SDHC slot, support up to 32GByte |
| FRAM |
64KBit high speed F-RAM with virtually unlimited writing cycles |
| Security |
Hardware security-dog for hardware & software protection |
| RTC |
CR1220 RTC battery socket |
| Button |
1x Side button (user interrupt) |
| 1x Reset button (inside) |
| LED |
3x Power indicator |
| 2x Programmable indicator |
| Boot mode switch |
1x 6Bit boot mode switch |
| Power connectors |
1x 5V 2A DC power connector |
| 1x 5V 2A built-in power connector |
| Expansion connectors |
1x 3.3V LCD module interface with touch screen support |
| 1x 1.8V WIFI module connector |
| 1x 1.8V GPIO expansion connector |
| 1x 1.8V GPMC High speed bus expansion |