HC-06 Arduino Bluetooth module

این بورد یک مازول بلوتوث برای بورد arduino است و دارای خصوصیات زیر است:

Module: HC-06 slave
Frequency : 2.4GHz ISM band
Modulation : GFSK(Gaussian Frequency Shift Keying)
Emission power : <=4dBm, Class 2
Sensitivity : <=-84dBm at 0.1% BER
Speed : Asynchronous: 2.1Mbps(Max) / 160 kbps, Synchronous: 1Mbps/1Mbps
Profiles : Bluetooth serial port
CSR chip : Bluetooth v2.0

Interface: VCC, GND, TXD, RXD(reserve LED status output pin, and MCU can judge the Bluetooth connection state through it)
3.3V LDO
Input voltage: 3.6V - 6V(never over 7V)
Input current: 30mA(unpaired) 10mA(paired)
Interface level: 3.3V(you can directly connect a variety of SCM 51, AVR, PIC, ARM, MSP430, etc. 5V microcontroller can also be directly connected without MAX232)
Effective distance: 10M(open area)
Communication format: 8 data bits / 1 stop bit / without parity
You can set the baud rate, name and pair password by AT commands when there is no bluetooth connection
This module is slave, it can be paired with computer, bluetooth master, mobile phone, PDA, PSP and so on
Size: 3.57 x 1.52cm

http://www.instructables.com/id/Andruino-A-Simple-2-Way-Bluetooth-based-Android-C/

http://www.instructables.com/id/How-control-arduino-board-using-an-android-phone-a/

http://arduino.cc/en/Main/ArduinoBoardBT?from=Main.ArduinoBoardBluetooth